How to install the vertical suspended sump pump?

How to install the vertical suspended sump pump?

After installing the vertical suspended sump pumps,check whether the coupling runs flexibly and check whether there are some metal fiction soundscheck the concenticitly of the pumo shaft and motor shaft. The difference on the outer round of the two couplings can'texceed 0.3mm.

The bearing bush should soak into the liquid. Otherwise your should lead to appropriate liquid from the self-outlet pipeline(orjoint from the outside), lubricate bearing bush and prevent the dry mill damaging.in chemical process system,if there are some odds to drop into the container,in order to prevent the odds from damagingthe vertical sump pumps body, you can install a proper conservancy trash-rack at the suck pipe place.the distance from the pumo suck entrance to the botom of the container is 1.5-2 fimes of the suck bore.four rounds can'be less 2.5 times. The small bore gets the large value and large bore gets the small value.The liauid-out pipeline of the vertical suspended sump pumps should separately set uo the support frame and its weiaht can't be allowed to add thepump outlet flange.

After finishing installation,check whether the nuts of all the parts are tightened and then installthe vertical suspended sump pumps and motor on thecontainer after the coupling runs flexibly. After installation, check it again.

China vertical suspended sump pump manufacturer provides various stainless steel and duplex steel vertical suspended sump pumps with affordable prices and stable performance. For more information, please contact 008613974960765.